Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Impact Windows in Whitney: What to Know First
We provide independent CGI impact window service in Whitney, and most replacement projects are measured within a few days of your first call and installed within two to four weeks once the order is placed. Expect to pay somewhere between $650 and $1,400 per opening depending on series, glass package, and how many windows you’re doing at once. We’re not CGI and we’re not authorized by them; we’re an independent installer who works on their products every week and knows where they hold up and where they don’t.
This page is for Whitney homeowners who already have CGI windows, or who are weighing them against PGT and other impact-rated brands. If that’s you, call (844) 797-3297 and a real person picks up. No voicemail, no call center.
How CGI Products Fail – and How We Fix Them
CGI builds a solid product, but no window is forever, and Whitney’s climate works on them in specific ways. Here’s what we actually see on CGI jobs and what we do about it.
- Seal failure on the 5000 Series impact line. Whitney sits at the edge of the Mojave, which means summer afternoons swing from 70s to triple digits and back down overnight. That thermal cycling is brutal on the butyl seal around insulated glass units, and a foggy or hazy pane on a 5000 Series window usually traces right back to it, not to a manufacturing defect. Our fix is a full IGU replacement with the original glazing spec, not a reseal and a prayer.
- Weep hole blockage on CGI sliding and single-hung units. Wind-driven dust from the valley floors plugs the drainage channels faster than most homeowners expect. Once water can’t escape, it backs up under the sill and starts rotting the framing. We clear, test, and re-drill the weep path to spec.
- Roller and track wear on CGI sliding glass doors. The stainless rollers on CGI sliders are good, but the tracks collect grit, and after a few seasons the door starts dragging or jumping the track. We replace rollers with OEM-spec hardware and recondition the track rather than convincing you to swap the whole door.
- Frame and glazing bead separation on older CGI installs. Whitney’s UV load is intense, and on units installed a decade or more ago we sometimes find the glazing bead pulling away from the sash. That’s a water intrusion waiting to happen. We re-set the bead and re-glaze to the manufacturer’s spec so the impact rating stays intact.
- Aftermarket glass that voids your rating. This is the one that bothers us most. We’ve pulled CGI frames where a previous “repair” used a generic pane with no impact rating, and the homeowner had no idea they’d lost their wind-borne debris protection until we pointed it out. We always install rated glass in a rated frame, OEM or a quality aftermarket equivalent that meets the same spec.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Impact Windows Process
- 1
Diagnose in person. We look at every opening you’re concerned about, check the seals, glazing, and hardware, and tell you what’s failing and why. No guessing from photos.
- 2
Decide OEM vs. aftermarket, out loud. Sometimes OEM is the right call for warranty preservation. Sometimes a quality aftermarket part is the smarter buy and we’ll say so. You’ll hear the trade-off in plain English.
- 3
Written, upfront pricing. Line items, not a lump sum. The number on the estimate is the number on the invoice, and if the scope changes we talk to you before we touch anything.
- 4
Install with a background-checked, uniformed technician. You know who’s at your door before the job starts. That’s not a small thing in a town like Whitney, where most of us know the neighbors.
- 5
Test every unit. We operate the windows, check the locks, verify drainage, and confirm the seal before we call it done.
- 6
Clean up and back it up. We haul out the debris and leave the room the way we found it. Then the 36500-Day Done Right Promise covers the work: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Impact Windows Costs in Whitney
Here’s a realistic picture of what CGI impact window work runs in Whitney. Every job is a little different, so treat these as ranges, not quotes.
- Single IGU replacement (foggy or failed pane): $450 – $850 per opening
- Full CGI impact window replacement, standard size: $650 – $1,200 per window
- Large or custom-sized CGI impact unit: $1,100 – $2,200 per window
- Sliding glass door, CGI impact-rated: $1,800 – $3,800 installed
- Hardware and track reconditioning (per door): $150 – $400
What moves the price: the series, glass package (low-E, laminated, or tinted), number of openings, and whether you’re replacing the whole unit or just the glass. Whitney’s sun exposure means a good low-E package pays for itself over time in cooling costs, so we’ll always walk you through that trade-off. Call (844) 797-3297 for a free written estimate. It’s free, it’s line-item, and there’s no trip charge if you’re in our home county.
Why Whitney Homeowners Call Winslow Windows & Doors Whitney for CGI Work
We’ve been a fixture in this community since 2011, locally owned and owner-operated, and Ed’s name is on the door and on every job. We answer the phone 24/7 with a live person, so a neighbor can call at 2 a.m. and get someone who knows what they’re talking about. Every technician is background-checked and arrives in uniform.
CGI is one of the eight brands we’re authorized to install, and we work with the others too: PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That multibrand range matters because it means we can give you an honest comparison instead of steering you toward whatever we stock. And we stand behind all of it with the 36500-Day Done Right Promise, plus $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
FAQs
Are your CGI windows covered by a warranty? Yes. Our workmanship is covered by the 36500-Day Done Right Promise, and the CGI product itself carries its manufacturer warranty on top of that. We’ll walk you through exactly what each covers before you sign.
Can you get CGI parts, or am I looking at a long wait? We source CGI parts through authorized channels, and in most cases we can get what we need without a long lead time. Call (844) 797-3297 and we’ll give you a straight answer on timing for your specific window.
Should I repair or replace my CGI impact windows? If it’s one failed pane or a worn roller, repair is usually the smart money. If you’ve got multiple failing seals or the frame itself is compromised, replacement often costs less over the next decade. We’ll tell you which one you’re looking at, honestly.
How fast can you get out to Whitney? We answer the phone 24/7, and we schedule Whitney jobs promptly. A straightforward measurement and quote usually happens within a few days of your call.
Do you pull permits for CGI window replacement in Whitney? Yes, where the project requires it, we handle permits and inspections. That’s part of getting it done right the first time.
Ready to talk about your CGI windows? Call Winslow Windows & Doors Whitney at (844) 797-3297 for a free estimate. A real person answers, every time. The one down the road.
Written by the team at Winslow Windows & Doors Whitney, serving Whitney and nearby areas.