Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Custom & Geometric Windows in Whitney: What to Know First
Custom and geometric CGI windows in Whitney are ordered to the opening – not pulled from a shelf – so a shaped, arched, oversized, or custom-unit replacement typically runs three to six weeks from measurement to installed glass, with straightforward reglazes and hardware fixes often wrapped up on the first visit. Expect real line-item numbers here rather than a teaser: shaped impact glass is the cost driver, and we quote it in writing before anyone touches your home. This page is for Whitney homeowners who already own a CGI unit that’s failed, fogged, leaking, or sitting in an opening that needs a new custom or geometric window built to fit – and want it handled by people who’ve worked on these units before.
Call (844) 797-3297 for a free estimate. As an independent CGI service provider, we’re not affiliated with or authorized by the manufacturer – we’re just fluent in the product.
How CGI Products Fail – and How We Fix Them
CGI builds a large custom-shape lineup, and the failures we see in Whitney homes track the shape as much as the brand. Here’s what actually shows up on our diagnostics:
- Seal failure at the frame curve on geometric and arched units. On curved and radius-top CGI units, the perimeter glazing seal takes more stress than on a rectangle because the glass edge geometry doesn’t allow the same uniform compression. When we pull a fogged arched unit, we usually find the failure starts at the springline or the tightest point of the radius, not the middle of the pane. Our fix is a full reglaze with the correct spacer and setting blocks positioned for the curve, not a generic reset.
- Thermal-pane fogging on oversized custom openings. Big CGI units in Whitney get hammered by intense differential heating – a wide south or west-facing custom pane can read far hotter at midday than an ordinary window. When the seal gives, you get the familiar haze and condensation between panes. We verify whether the sealed unit or the frame is at fault before quoting a replacement glass pack, so you don’t pay for a whole unit when only the glass assembly needs swapping.
- Water intrusion at shaped-frame joints. Geometric windows have more joints, miter points, and weatherstrip transitions than a standard unit, and every one is a path for wind-driven rain. We find it with a controlled water test rather than guessing, then re-seal and re-weatherstrip the specific joint – the source, not the symptom.
- Operator and hardware wear on operable custom units. Shaped and oversized CGI windows that open carry heavier hardware loads, and the mechanisms wear faster on a large sash. We identify the exact operator or hardware part, and where the OEM part is discontinued or backordered we source a quality aftermarket match that meets the same specs – always in the context of keeping your warranty intact.
- Sagging or binding sashes in wide openings. Oversized sashes on a custom CGI opening can drop or bind over time as the frame settles. We re-square, adjust, and correct the fit and alignment so the unit seals and operates the way it should.
Two things owners can’t get from the manufacturer’s own site: on CGI’s shaped and radius units, the practical cause of most fogging is failed perimeter sealing at the curve – a curve-specific detail, not a generic “the seal failed” – and the Whitney climate’s wide day-to-night temperature swing stresses oversized custom glass differently than a mild climate does. Both change how we diagnose and what we quote.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Custom & Geometric Windows Process
- 1
Call answered by a live person. You reach a real person any hour – no voicemail loop – and we book a free estimate that fits your schedule.
- 2
In-home diagnostics. A background-checked, uniformed technician inspects the unit, tests for the actual water path on shaped frames, and measures the opening precisely for a custom or geometric replacement. You know who’s at your door before they knock.
- 3
Written, upfront quote. We hand you line-item pricing – glass, frame, labor, permits if any apply – and decide together whether a repair or a full custom replacement is the smarter spend. No change-order surprises.
- 4
Parts decision, warranty-safe. Where a fix makes sense, we choose between the OEM part and a quality aftermarket match, always with an eye on protecting your existing warranty and doing the job once.
- 5
Install or repair, then test. We install, or complete the repair and reglaze, then re-test the seal and operation against the source we found – not just a visual once-over.
- 6
Cleanup and the promise. We clean up and walk the work with you, backed by our 36500-Day Done Right Promise – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Custom & Geometric Windows Costs in Whitney
Real ranges for the CGI work we see most in Whitney, so you can plan:
| Scope | Typical range |
|---|---|
| Reglaze / sealed-unit replacement on a shaped CGI window | $280 – $750 per unit |
| Hardware or operator replacement on an operable custom unit | $180 – $450 |
| Water-test, re-seal, and re-weatherstrip on a geometric frame | $250 – $600 |
| Custom-impact or geometric replacement unit (built to opening) | $900 – $2,800+ per unit |
| Oversized opening – custom unit and install | $1,800 – $5,000+ |
What moves the number: shaped and oversized impact glass, the complexity of the frame geometry, whether the glass or the whole unit fails, and access at the opening. We give you a free, written line-item estimate so the invoice matches the quote. Call (844) 797-3297 to schedule yours – estimates are free, and there’s no trip charge inside our home county.
Why Whitney Homeowners Call Winslow Windows & Doors Whitney for CGI Work
Ed’s name is on the door, and on every job we do – Winslow has been locally owned and owner-operated in its communities since 2011, with a published address and license number, no shell games. Our technicians carry up to 15 years of experience, arrive background-checked and in uniform, and have handled CGI’s custom and geometric units specifically – the curve sealing, the oversized-glass stress, the shaped-frame intrusion points. Because we also install PGT, CWS, ES Windows, and ECO Window Systems, you get an honest read on whether your CGI unit is worth repairing or whether one of those lines is the better fit for the opening. Every job sits under the 36500-Day Done Right Promise, and a live person answers every call, 24 hours a day – a neighbor you can call at 2 a.m. and someone will actually answer. That’s what we mean by the one down the road.
FAQs
Does replacing a CGI window void my warranty? Not if it’s done correctly – a proper, spec-matched repair or replacement protects the warranty rather than voiding it, and we always work warranty-safe. Bring us your paperwork and we’ll confirm what the original coverage allows before we quote. Call (844) 797-3297 for a free second opinion on any written estimate.
Can I still get parts for older CGI custom and geometric windows? Usually, yes – some shaped and oversized unit parts are special-order and a few are backordered or discontinued. When the OEM part isn’t available, we source a quality aftermarket match that meets spec, and we tell you upfront which path we’re taking. Call (844) 797-3297 to check parts for your specific unit.
Should I repair my CGI window or replace it? Repair is the smarter spend when it’s the glass pack, hardware, or a seal that failed and the frame is sound; replacement makes more sense when the frame is warped, the geometry is compromised, or the unit keeps leaking at multiple points. We diagnose the real cause first, then quote both so you can decide. Call for a free estimate.
How long does a custom or geometric CGI replacement take? Custom units are built to the opening, so measurement to installed glass typically runs three to six weeks, while reglazes and hardware fixes are often finished on the first visit. We give you a firm timeline in your written quote. Call (844) 797-3297 to get the clock started with a free estimate.
Do you handle the permits and inspections? Where a permit is required for your Whitney job, we pull it and make sure the work passes inspection. Your written quote tells you what applies. Call (844) 797-3297 to schedule your free estimate.
Ready to get your CGI custom or geometric windows sorted the right way? Call Winslow Windows & Doors Whitney at (844) 797-3297 for a free estimate – upfront pricing, a live person on the line at any hour, and a promise that stands behind the work. Seniors and veterans take a permanent 10% discount, and we’ll gladly give a free second opinion on any written estimate.
Written by the team at Winslow Windows & Doors Whitney, serving Whitney and nearby areas.