Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateECO Window Systems Custom & Geometric Windows in Whitney: What to Know First
Custom and geometric windows from ECO Window Systems are measured-to-order units, so lead time in Whitney typically runs four to eight weeks from template approval to installation, depending on glass packages and shape complexity. Budget for arched, radius, and trapezoid impact units in the $1,400 to $4,800 range per opening, with oversized or curved configurations running higher. We’re an independent ECO Window Systems service provider, not the manufacturer, and we quote every job with line-item pricing before work starts.
This page is for Whitney homeowners who already have ECO Window Systems product in the wall – or who are specifying it for a room addition, a stairwell, a two-story foyer, or a corner that a stock rectangle just won’t fill. If your unit is leaking, fogging, or the sash won’t seat, the same expertise applies. Call (844) 797-3297 and a live person answers, any hour.
How ECO Window Systems Products Fail – and How We Fix Them
ECO Window Systems builds aluminum and vinyl impact product in South Florida, and their custom and geometric lines show up in Whitney on homes that want hurricane-rated glass in a shape standard catalogs don’t carry. The failure modes are specific, and so are the fixes.
- Radius and arch units losing their seal at the curve. The most common ECO Window Systems call we get on arched and eyebrow units is water tracking behind the frame at the crown. The laminated glass and the curved extrusion expand at different rates through Whitney’s 60-degree winter nights and 105-degree July afternoons, and the factory sealant line at the radius can open over time. We pull the unit, re-bed the glass on fresh structural glazing tape, and reseal the full perimeter rather than caulking over the gap.
- Fogging between panes on insulated geometric glass. ECO Window Systems insulated units with shaped spacers are harder to build than rectangles, and a spacer that’s kinked at the radius will let the argon escape and moisture in. Once a shaped IGU fogs, it’s a replacement – resealing won’t bring the seal back. We order the exact glass makeup and template-match it so the new unit drops into the existing frame.
- Oversized openings with sash sag. On ECO Window Systems multi-panel and oversized configurations, a sash that starts dragging or won’t latch is usually a worn roller assembly or a hinge that’s loosened from the weight of the panel – not a frame problem. We replace the hardware with OEM-spec parts and re-shim the frame, which is far cheaper than the customer expects when they call thinking they need a new window.
- Water intrusion at the sill on picture and shaped combos. Whitney sits in the Mojave, so we don’t fight constant rain – but we do fight wind-driven dust and the occasional monsoon downpour, and both find a poorly flashed sill. On ECO Window Systems custom jobs, we check the sill pan and the weep path on every callback. If the original install skipped a back-dam or set the unit flush to the stucco, we correct it during the fix.
- Impact glass de-lamination on older units. ECO Window Systems impact laminated glass can develop edge de-lamination on south- and west-facing elevations after years of Whitney sun. It’s a glass failure, not an installation failure, and the fix is glass replacement only – the frame and hardware are typically still sound.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our ECO Window Systems Custom & Geometric Windows Process
- 1
The call. You reach a live person, day or night, at (844) 797-3297. We ask what the window is doing, get the address, and set the site visit.
- 2
On-site diagnostics. A background-checked, uniformed technician measures the rough opening, templates the shape, photographs the failure, and checks the existing frame for plumb and square. If the frame is sound, we keep it.
- 3
The parts decision. For hardware and small components, we use OEM ECO Window Systems parts when they’re available and a quality aftermarket equivalent when they aren’t – and we tell you which one we’re using and why.
- 4
The quote. Line-item, written, no change orders. You get a free second opinion on any estimate you’re holding from another company before you decide.
- 5
The install or repair. We template the opening, order the unit to spec, and install with proper flashing, sill pan, and weep path. Permits get pulled and inspected where Whitney code requires it.
- 6
The test and the cleanup. We cycle every operable sash, water-test the perimeter, check the seal line, and haul off the debris. Then the 36500-Day Done Right Promise kicks in – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat ECO Window Systems Custom & Geometric Windows Costs in Whitney
These are real ranges for the Whitney market, not national averages. Every quote is free and every number is written down before we touch the wall.
| Scenario | Typical Range |
|---|---|
| Hardware repair – roller, hinge, latch on an ECO Window Systems unit | $180 – $420 |
| Reseal a radius or arched unit (pull, re-bed glass, reseal) | $380 – $720 |
| Replace a fogged insulated shaped IGU (glass only) | $650 – $1,600 |
| Custom impact geometric window, standard shape, installed | $1,400 – $2,600 |
| Arched, radius, or curved impact unit, installed | $2,400 – $4,800 |
| Oversized opening / picture-shape combo, installed | $3,200 – $7,500+ |
What moves the price: shape complexity, glass package, whether the frame can be reused, elevation (second-story and high-foyer units add labor), and whether permits are required. A single-story Whitney ranch with a sound frame sits at the low end. Call (844) 797-3297 for an exact quote – estimates are free, and there’s no trip charge inside the home county.
Why Whitney Homeowners Call Winslow Windows & Doors Whitney for ECO Window Systems Work
We’re locally owned and owner-operated, which means the person whose name is on the business stands behind the job. The 36500-Day Done Right Promise is our standard: if it’s not done right, we come back and make it right, period. Our technicians have up to 15 years of experience, they’re background-checked, and they show up in uniform – you know who’s at your door before the truck pulls up.
We’re an authorized installer for eight brands alongside ECO Window Systems – PGT, CGI, CWS, ES Windows, Mr-Glass, Therma-Tru, and ViewLux – so when an ECO Window Systems part is back-ordered or discontinued, we’re not stuck. We have options, and we’ll tell you honestly when a different brand’s unit is the better fit for a particular opening. That’s the advantage of a company that isn’t tied to one manufacturer.
Standing offers don’t expire: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the home county, and a 10% discount for seniors and veterans. No limited-time games.
FAQs
Not if the work is done correctly with proper parts and documented. We use OEM ECO Window Systems hardware where it’s available and note every part we install, because a warranty claim later needs that paper trail. An independent service provider like us doing the work doesn’t void the manufacturer’s warranty on the unit itself – but sloppy aftermarket parts or a poorly sealed install can. We’re careful for exactly that reason. Call (844) 797-3297 to talk through your specific situation.
Sometimes, yes – ECO Window Systems still supplies many components for series that are no longer actively sold, but availability varies by part. When an OEM part isn’t available, we source a quality aftermarket equivalent that matches the original spec, and we tell you upfront which route we’re taking. For shaped or radius glass, we template the opening and have the unit built to match, so a discontinued glass makeup isn’t a dead end. Call for a parts check on your specific series.
Repair if the frame is sound and the problem is hardware, a seal, or a single IGU – that’s almost always the cheaper, faster call. Replace if the frame is bent or water-damaged, if multiple panes have failed, or if the unit is more than about 20 years old and you’re facing a second glass replacement. We give you the honest math on both, free, with no pressure to replace when a repair will do.
Custom and geometric units are made to order, so expect four to eight weeks from template approval to install, depending on glass package and shape. Repair work on existing units is usually much faster since parts are more readily available. We’ll give you a real timeline in the written quote, not a guess, because a promised date you can’t hold is worse than an honest one. Call (844) 797-3297 to start the measurement.
No – we’re an independent ECO Window Systems service provider, not affiliated with or authorized by the manufacturer. We install, repair, and replace their product because we know the line and its failure points, but we don’t represent them. That independence is the point: we recommend what’s right for your Whitney home, not what’s on a manufacturer’s sales sheet. PGT, CGI, CWS, and ES Windows are also in our lineup.
Written by the team at Winslow Windows & Doors Whitney, serving Whitney and nearby areas.