Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Sliding & Patio Doors: The Whitney Owner’s Guide
We install CGI-compatible sliding and patio doors for Whitney homeowners, with typical installed pricing running $2,400-$6,800 depending on size, glass package, and frame configuration. We can often schedule a Whitney assessment within a couple of days, and we always give you a written, line-item quote before any work is ordered. Most owners discover a failing sliding door the same way: the panel suddenly drags on the track, the lock no longer lines up, or a fine fog appears between the panes after a windstorm. That fog is the telltale sign the sealed glass unit has lost its desiccant charge, and it’s the single most common reason we’re called out to Whitney properties.
Winslow Windows & Doors is an independent service provider. We are not affiliated with CGI, but we are an authorized installer for CGI products, so we know the panel dimensions, roller specs, and glass packages these doors leave the factory with.
Which CGI Models This Applies To
CGI makes sliding and patio doors in two main family lines: single-slider configurations (one fixed panel, one operating panel) and multi-panel sliders that stack or pocket into a wall cavity. The most common residential models in Whitney are two-panel sliders in the 6-foot and 8-foot width classes, plus a smaller number of three-panel units on newer builds. The part that fails most is the lower roller assembly, followed by the glass unit itself.
Here’s the compatibility gotcha that trips people up: CGI has used at least two different roller-shoe profiles across its production years, and they are not interchangeable. A roller that fits one track style will ride rough or jump the rail on the other. Before we quote a part, we read the etched label on the door’s interior frame and measure the track depth and the panel stile, not just the door width. If the label is worn away, a photo with a tape measure across the roller channel tells us what we need.
On the OEM-vs-aftermarket question: for rollers and weatherstrip we frequently use quality aftermarket equivalents that match or beat the original spec, which keeps the cost down. For the glass unit and the door lock hardware, we stick with genuine CGI-spec parts. Mixing a lower-grade glass unit into a CGI frame risks the seal failing early and the energy rating dropping off. We tell you which parts are OEM and which are aftermarket on the written estimate. Whitney sits in a high-solar-load, high-summer-heat climate, and the heat cycling is hard on glass seals and rubber weatherstrip alike.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CGI Sliding & Patio Doors Is Failing
- Fog or condensation between the panes. The sealed glass unit has lost its inert gas or its seal, and the moisture shows up as a hazy film you can’t wipe off from either side. Replacing the glass unit, not the whole door, usually fixes this.
- The operating panel drags or sticks. Worn roller bearings or a flat-spotted roller wheel are the culprit. Once a roller seizes, it gouges the aluminum track, so catching it early saves the track.
- The lock won’t latch or the handle feels loose. A dropped or misaligned panel pulls the lock out of engagement. Sometimes it’s a worn roller causing the misalignment, not the lock itself.
- Weatherstrip is cracked or peeling. Whitney’s summer heat bakes rubber weatherstrip over time, and once it hardens, the door leaks air and dust. This is the most affordable part to swap and the one most owners put off too long.
- Water pooling on the interior sill after rain. A failed sill seal or a clogged weep hole lets monsoon rain back up into the track. Left long enough, this rots the framing around the opening.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
| Item | Typical Whitney Price |
|---|---|
| Roller assembly replacement (per panel) | $95-$220 |
| Weatherstrip / sweep replacement | $120-$260 |
| Sealed glass unit replacement | $350-$900 |
| Lock and handle hardware | $175-$340 |
| Full two-panel slider replacement, installed | $2,400-$6,800 |
The price ranges reflect what drives the total: door width, whether it’s a single or multi-panel unit, OEM versus quality aftermarket parts, and whether the frame or track also needs work. Every quote is itemized line by line so you see the part cost and the labor separately. Work we perform is covered by our workmanship warranty, and any part we supply carries its own manufacturer coverage on top of that. Our $40-off-any-repair-over-$200 standing offer applies here, and the no-trip-charge policy holds inside our home county.
DIY or Call Us?
You can safely check a few things yourself without touching a tool. Slide the panel slowly and listen for grinding, look at the track for gouges, and eyeball the glass for fog. Replacing weatherstrip is a genuinely manageable weekend job if you match the profile exactly. Where DIY goes wrong is on the roller assembly and the glass unit. A mis-seated glass unit in a CGI frame can crack under heat cycling, and a wrong roller profile will ruin the track fast. Those are the calls to hand to a professional. Our technicians have up to 15 years of experience and are background-checked and uniformed, so you know who’s at your door. Call (844) 797-3297 and a live person answers, any hour.
FAQs
How long do CGI sliding patio doors last in Whitney? The frame itself often lasts 20 years or more, but the glass seal and rollers typically give out well before that in Whitney’s heat. Most owners see fogged glass or dragging rollers somewhere between 10 and 15 years. Call (844) 797-3297 for a free estimate on your specific door.
Can a fogged glass unit be repaired instead of replaced? No, a failed sealed unit can’t be recharged or resealed in the field. The fix is a new sealed glass unit set into your existing frame, which costs far less than a whole-door replacement. Call (844) 797-3297 and we’ll quote the glass-only option.
How long does a roller or glass swap take? A roller replacement is usually a same-visit job of one to two hours per panel. A sealed glass unit swap generally takes a couple of hours once the part is on hand. Call (844) 797-3297 to schedule your free estimate.
How do you source the right CGI part for my door? We read the door’s etched label and measure the track and roller channel, then order the correct CGI-spec or quality aftermarket part. We don’t carry every part on the truck, so lead time varies by part. Call (844) 797-3297 to start the match.
If your CGI slider has fogged glass, a dragging panel, or a lock that won’t catch, the fastest path to a real answer is a phone call. Winslow Windows & Doors has been locally owned and owner-operated since 2011, backs every job with the 36500-Day Done Right Promise, and publishes our address and license number so you know exactly who you’re dealing with. We’re the one down the road in Whitney. Call (844) 797-3297 for a free estimate.
Written by the team at Winslow Windows & Doors Whitney, serving Whitney and nearby areas.