Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCWS Custom & Geometric Windows in Whitney: What to Know First
If you own a CWS custom or geometric window in Whitney and something has gone wrong with it, we can help. We’re an independent CWS service provider handling custom impact windows, arched and curved units, geometric and shaped windows, and oversized openings. Most custom and geometric service calls in Whitney are diagnosed within a single visit and completed in two to four weeks once the correct parts or replacement glass are confirmed. Custom work isn’t cheap, and we won’t pretend it is: shaped glass, curved frames, and oversized impact units carry real material costs. What we do promise is a written, line-item estimate before any work begins, so you know the number and it holds. No change orders on the back end. Call (844) 797-3297 to schedule a free estimate.
How CWS Products Fail – and How We Fix Them
Custom and geometric CWS windows fail differently than standard rectangles, and the difference shows up in specific, repeatable ways. Here’s what we see in Whitney homes.
- Water intrusion at the arch crown on CWS series custom arched windows. Curved units collect water at the top of the radius where the sill and frame meet, especially on the windward side of the house. In Whitney, where monsoon-season wind-driven rain hits hard from the south and west, that crown joint is the first place a leak starts. Our fix is to re-seal the crown joint with a compatible sealant rated for the frame material, then verify the drainage path is open and the weep system is functioning.
- Seal and gasket failure on CWS impact geometric units. The gaskets around shaped glass take more stress than on standard windows because the frame geometry flexes differently at stress points. Over time, sun exposure in Whitney’s high-desert climate (years of UV and dry heat) hardens the gasket and it loses its grip. The window may look fine but let air and moisture creep in. We replace the gaskets with OEM-matched or quality aftermarket equivalents and check the whole perimeter, not just the obvious spot.
- Hardware binding on oversized CWS openers. Oversized custom windows have heavier sashes, and the hardware carries more load. We regularly see cranks, hinges, and locking mechanisms binding or failing on large geometric units because the weight exceeds what a worn mechanism can handle. Our technicians inspect the hardware, replace worn components with the correct load-rated parts, and adjust the alignment so the sash moves cleanly again.
- Glass stress cracks at geometric corners. Sharp corners on geometric windows (triangles, trapezoids, hexagons) concentrate stress. In Whitney’s temperature swings (hot days, cool nights) repeated thermal cycling can cause hairline cracks at those corners. We assess whether the glass is a warranty matter or a repair, source the correct replacement, and install it without disturbing the frame if the frame is sound.
- Frame movement and sealant failure on curved CWS units. Curved frames can shift as the building settles, and the sealant around the perimeter cracks. It’s a common issue in Whitney’s expansive soils. Our fix is to reset the frame where needed, re-seal with a flexible sealant rated for the material, and confirm the window operates correctly after the reset.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CWS Custom & Geometric Windows Process
Here’s exactly what happens when you call us for a CWS custom or geometric window in Whitney.
- 1
Phone diagnosis and scheduling. A live person answers your call, 24 hours a day, 7 days a week. No voicemail, no call center. We gather details about the window and set a visit.
- 2
On-site inspection. Our technician, background-checked and in uniform, inspects the window, identifies the specific failure, and documents it with photos.
- 3
Parts decision. We determine whether the repair calls for OEM CWS parts or a quality aftermarket equivalent. Some components have exact OEM matches; others don’t, and we’ll explain the trade-off and what it means for your warranty and timeline.
- 4
Written estimate. You get a line-item quote before we start. Upfront pricing, no surprises on the invoice. Free second opinions on written estimates are always available.
- 5
The repair. Our technicians (up to 15 years of experience) perform the work, following warranty-safe practices on the CWS unit.
- 6
Testing and cleanup. We test operation, check seals and drainage, clean up, and leave you with a clear record of what was done.
See the difference
Before
After
Before
After
Before
AfterWhat CWS Custom & Geometric Windows Costs in Whitney
Costs vary by window type, size, and what’s wrong. Here are the ranges we see in Whitney.
| Scenario | Typical Range |
|---|---|
| Diagnostic visit and written estimate | Free |
| Seal and gasket replacement (single unit) | $180 – $450 |
| Hardware repair on oversized opener | $250 – $600 |
| Glass replacement, geometric unit | $400 – $1,200 |
| Frame reset and re-seal on curved unit | $350 – $900 |
| Full custom impact unit replacement | $1,200 – $4,500+ |
What moves the price: glass shape and size, whether the glass must be custom-cut, OEM vs. aftermarket parts, and whether the frame needs restructuring. Call (844) 797-3297 for an exact quote. Estimates are free.
Why Whitney Homeowners Call Winslow Windows & Doors Whitney for CWS Work
Ed Winslow’s name is on the door, and on every job we do. We’ve been locally owned and owner-operated since 2011, and we answer the phone live, 24/7. Our technicians are background-checked and arrive in uniform, so you know who’s at your door. On CWS custom and geometric work, our people know the model lines and the failure patterns. And because we’re an authorized installer for eight brands including PGT, CGI, ES Windows, and ECO Window Systems, we’re never stuck if a CWS part is back-ordered; we can advise on the best path forward. Every job is backed by our 36500-Day Done Right Promise: if it’s not done right, we make it right. We’re the one down the road.
FAQs
Not if it’s done correctly. We use warranty-safe practices on every CWS job, so the repair itself doesn’t void your coverage. If a part is no longer covered, we’ll tell you before we start. Call (844) 797-3297 to schedule a free estimate.
Often, yes. For many older CWS lines we can source OEM parts or a quality aftermarket equivalent that fits and performs. In some cases the aftermarket option is actually the better long-term fix. We’ll lay out both. Call (844) 797-3297 for an estimate.
Repair is usually the right call when the frame and glass are sound and the problem is seals, hardware, or alignment. Replacement makes more sense when the glass is cracked beyond repair or the frame has moved and won’t hold. We’ll give you an honest recommendation with numbers. Call (844) 797-3297 for a free estimate.
We schedule visits as quickly as possible, and a live person answers your call any hour to get you on the calendar. Call (844) 797-3297 now for a free estimate.
No trip charge inside our home county. For Whitney addresses, there’s no fee to come out. Call (844) 797-3297 to schedule your free estimate.
Written by the team at Winslow Windows & Doors Whitney, serving Whitney and nearby areas.