Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCWS Sliding & Patio Doors: The Whitney Owner’s Guide
Replacing a CWS sliding or patio door in Whitney typically runs $2,400 to $5,800 installed, depending on panel count, glass package, and whether the frame opening needs any repair. We install CWS-compatible doors for Whitney homeowners, and every job is quoted upfront in writing so you see parts and labor broken out before anything is ordered. Most owners land here after one of three things happens: the door starts dragging on the track, the glass fogs from the inside, or the latch stops catching and the door just won’t lock. If that’s you, you’re in the right place.
Which CWS Models This Applies To
CWS builds several residential sliding and patio door lines, and the part that fits one won’t fit another. The most common compatibility mistake we see in Whitney is ordering a replacement roller or latch based on the door’s age alone. CWS changed roller housing dimensions and track profiles across production runs, so two doors that look identical from the inside of the house can take different hardware. The model and series tag is usually on the door’s interior top or side jamb, on a sticker about the size of a business card. If it’s gone, we measure the panel height, width, and track depth instead. On the OEM-versus-aftermarket question: genuine CWS parts give you an exact fit and the factory spec, but aftermarket rollers and latches from quality suppliers often cost 30 to 50 percent less and hold up just as well in our climate. We’ll tell you honestly which route makes sense for your door. We’re an independent service provider, not affiliated with CWS.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CWS Sliding & Patio Doors Is Failing
Sliding doors rarely fail all at once. They give you warnings for months first. Here’s what Whitney owners describe when they call:
- The door drags or needs a shoulder to open. That’s almost always worn rollers or a track packed with desert grit. Rollers flatten and lose their round profile, and once that happens the panel sits lower in the track and scrapes.
- The glass fogs or collects moisture between the panes. The seal on the insulated glass unit has failed. In Whitney’s summer heat, with exterior temps regularly over 105, the argon escapes and moisture gets in. The glass has to be replaced; no amount of cleaning fixes it.
- The latch won’t catch, or the door won’t lock. Usually a worn keeper, a misaligned striker, or a handle set that’s worked loose over years of use. Sometimes the door has settled just enough that the latch no longer lines up.
- You feel hot air at the frame on a summer afternoon. Weatherstripping and sweeps break down faster here than in milder climates. A failed sweep lets in dust, heat, and the occasional scorpion, which is a real concern in Whitney.
- Water stains or soft wood at the sill. This is the one to take seriously. Stucco and sill interfaces on older Whitney homes can let water in, and by the time you see the stain, the framing behind it may be compromised.
Each of these points to a different part and a different fix. Getting the diagnosis right the first time is what keeps the cost down.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Whitney homeowners typically pay for CWS sliding and patio door work, parts and labor together:
| Job | Typical installed range |
|---|---|
| Roller replacement (per panel) | $180 – $340 |
| Latch, handle, or keeper replacement | $150 – $290 |
| Weatherstripping and sweep replacement | $160 – $320 |
| Insulated glass unit (IGU) replacement | $450 – $900 |
| Full sliding door replacement | $2,400 – $5,800 |
The range moves on panel size, glass package (low-E and impact-rated cost more), and whether the opening needs any repair once the old door comes out. We price upfront with a written line-item quote, and that quote is what you pay. No change orders for things we should have seen on the first visit. Workmanship is covered, and every job is backed by the 36500-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some checks are safe to do yourself. Clean the track with a vacuum and a stiff brush, then see if the drag improves. Look at the rollers through the access slot at the bottom of the panel and see if they’re flat or cracked. Test the latch with the door closed and see where it’s catching. Those are fine. What goes wrong with DIY on patio doors is the panel itself. A sliding glass panel on a CWS door can weigh well over 100 pounds, and lifting one out of the track without a second person or the right tool is how homeowners end up with broken glass, a bent frame, or a back injury. Replacing an insulated glass unit is also not a homeowner job: the unit is sealed, and if it’s installed with a bad seal or the wrong setting blocks, it fogs again within a season. If you’ve got a fogged pane or a panel that needs to come out, call us at (844) 797-3297. We’ll give you a free estimate before anything is ordered.
FAQs
Expect 15 to 20 years on the door frame and hardware, and 10 to 15 on the insulated glass unit in Whitney’s climate. The heat is the hard part. UV exposure and 100-plus-degree summers break down seals and weatherstripping faster here than in most of the country, so glass and sweeps tend to go before the frame does. Call (844) 797-3297 for a free estimate if your door is past that window and starting to show it.
Often, yes. Worn rollers, sweeps, latches, and handles are all replaceable on their own, and that’s usually the cheapest path. Fogged glass is the exception: once the seal is gone, the unit has to be replaced, not repaired. We’ll tell you which situation you’re in on the first visit rather than quoting a full replacement you don’t need.
A roller or hardware swap is usually done in under two hours. A full sliding door replacement takes most of a day, sometimes two if the opening needs repair. We give you a realistic timeline with the quote so you can plan around it. Call (844) 797-3297 to schedule your free estimate.
We start with the model tag on the door, and if it’s missing we measure the panel, track, and hardware to match the right part. Because we install CWS doors ourselves, we know which production runs take which hardware. We also service PGT, CGI, and ES Windows doors, so if your home has a mix, we can handle all of it. Call (844) 797-3297 and we’ll get the details before we quote.
Whitney homeowners don’t need to guess at what’s wrong with their CWS door. Tell us what it’s doing, and we’ll give you a straight answer and a written estimate with parts and labor spelled out. Our technicians have up to 15 years of experience, every technician is background-checked and arrives in uniform, and a live person answers the phone any hour of the day. Call (844) 797-3297 for your free estimate in Whitney today.
Written by the team at Winslow Windows & Doors Whitney, serving Whitney and nearby areas.