Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Custom & Geometric Windows in Whitney: What to Know First
We provide independent PGT custom and geometric window service in Whitney, with most repairs scheduled within a week and custom shape orders running four to eight weeks depending on the profile. Pricing is quoted upfront and line by line before any work starts, so you know what the arch, radius, or oversized opening actually costs before we touch it. There are no change orders after the fact. Call (844) 797-3297 to schedule a free estimate.
This page is for Whitney homeowners who already own PGT windows, particularly custom shapes like arches, half-rounds, eyebrows, trapezoids, and oversized picture units, and want to know how their specific product behaves in this climate and what it takes to put it right. As an independent PGT service provider, we work on the product. We aren’t PGT, and PGT doesn’t authorize or sponsor this page.
How PGT Products Fail – and How We Fix Them
PGT builds a good window. What we see in Whitney isn’t a brand problem, it’s an installation and climate problem, and it shows up differently on custom shapes than it does on rectangles. Here’s what we actually find, and what we do about it.
- Arch and radius units leaking at the mullion joints. On PGT WinGuard arched and half-round units, the curved frame is joined at one or more mullion seams, and that’s where water finds its way in. Whitney sits inside the Las Vegas Valley’s monsoon corridor, and a 20-minute August downpour against a southwest-facing arch will push water past a sealant joint that’s been baking at 160°F on the frame surface. We reseal and re-flash the joint with a high-movement sealant rated for desert thermal cycling, not a standard painter’s caulk that hardens and cracks by the second summer.
- Thermal pane failure on geometric units faster than on standard rectangles. PGT WinGuard and Estate series insulated glass carries a seal between the two panes, and on custom shapes that seal sees more stress because the perimeter-to-area ratio is higher. More edge, more failure points. A hazy or silvery arch window that’s six or seven years old is usually a seal failure, not dirt. We replace with a matched insulated glass unit built to the original shape rather than forcing a rectangular retrofit into a curved opening.
- Sagging or binding oversized sliders in the Estate and WinGuard vinyl lines. Oversized openings on a vinyl frame carry real weight, and in Whitney’s summer heat the vinyl softens slightly and the panel drops. The symptom owners describe is “it drags at the bottom corner.” It’s usually a worn tandem roller and a frame that’s settled, not a bad window. We replace the rollers, shim and re-square the frame, and check the sill for deflection before we call it fixed.
- Hardware corrosion and screen frame pitting on aluminum-clad and impact units. Valley dust plus monsoon humidity is hard on exposed hardware. PGT’s impact-rated custom units come with heavier frames and hardware than the standard line, and when the pivot bar or lock mechanism starts to bind, that’s what we see. We source OEM hardware where PGT still stocks it and a matching aftermarket part when the original is discontinued, and we tell you which one we’re using and why.
- Failed flashing at the rough opening on retrofitted shapes. Geometric windows are often added or replaced after the fact, and the rough opening detail is where a well-built PGT unit gets let down by a hurried install. We pull the interior trim, inspect the flashing and sill pan, and rebuild the opening detail before the window goes back in. A window that leaks because of the opening isn’t fixed by resealing the window.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our PGT Custom & Geometric Windows Process
Here’s how a PGT job actually runs, start to finish. Every step happens on your schedule and every technician is background-checked and arrives in uniform, so you know who’s at the door before the truck pulls up.
- 1
Call and diagnosis. You call (844) 797-3297 and a live person answers, day or night. We ask what you’re seeing: fogging, a leak, a binding panel, a crack at the arch. That conversation sets the appointment and tells us what to bring.
- 2
On-site inspection. We photograph the unit, read the PGT label and series info off the frame, and check the opening, flashing, and glass seal. On a custom shape, we template the actual opening rather than trusting a measurement sheet.
- 3
Parts decision. We price OEM PGT parts and quality aftermarket equivalents side by side and tell you which one we’d put in our own home. On impact glass, that decision matters for the unit’s rating, and we walk you through it.
- 4
The work. Repair, glass replacement, or full unit replacement, done to the original opening detail with movement-rated sealants suited to Whitney’s temperature swings.
- 5
Testing and cleanup. We water-test exterior seals where the job calls for it, operate the unit through its full range, and leave the room cleaner than we found it.
- 6
The guarantee. Every job is backed by the 36500-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Custom & Geometric Windows Costs in Whitney
Prices below are typical for Whitney-area PGT work and reflect what we quote. Your actual number depends on the unit, the shape, and what we find at the opening once we’re on site.
| Scenario | Typical Range |
|---|---|
| Reseal and re-flash a leaking arch mullion joint | $185 – $340 per joint |
| Replace insulated glass unit, custom shape (half-round, arch, eyebrow) | $420 – $950 per unit, depending on size and whether it’s impact-rated |
| Oversized slider roller and track rebuild | $260 – $520 |
| Hardware replacement (locks, pivots, multi-point mechanisms) | $140 – $380 |
| Full custom shape unit replacement, standard PGT line | $1,100 – $2,600 installed |
| Full custom shape replacement, impact-rated PGT WinGuard | $1,600 – $3,400 installed |
What moves the price: the shape itself (a true radius costs more than a 45° trapezoid), impact versus non-impact glass, whether the rough opening needs rework, and whether the unit is on a second story. We give you a written line-item quote before we start. Estimates are free, and a second opinion on any written estimate is free too. Call (844) 797-3297 for your quote.
Why Whitney Homeowners Call Winslow Windows & Doors Whitney for PGT Work
Ed’s name is on the door, and on every job we do. We’re locally owned and owner-operated, founded in 2011, with a published address and license number. There’s no shell company between you and the person responsible for the work.
Our technicians have up to 15 years of experience, and they know the PGT product line well enough to read the label and tell you what you’re dealing with before the first tool comes out of the bag. Every job carries the 36500-Day Done Right Promise. If it’s not done right, we come back and make it right.
We’re an authorized installer for eight premium brands, and when a PGT part is discontinued or a lead time is long, we can often solve the problem with a CGI, CWS, ES Windows, or ECO Window Systems match. Standing offers include $40 off any repair over $200, no trip charge inside the home county, and a permanent 10% discount for seniors and veterans.
FAQs
Repairs done with OEM parts and to PGT’s install specs generally keep the remaining manufacturer warranty intact, while repairs using untraceable aftermarket parts on impact-rated units can void it. We tell you which category a fix falls into before you approve it, and we document what was done. Call (844) 797-3297 if you want your warranty situation looked at first.
Many older custom-shape parts are still available through PGT, and where they aren’t, we source a quality aftermarket match that fits the original opening. Demand for PGT parts is strong in Whitney, so we check availability before we promise a timeline. Call (844) 797-3297 and we’ll check on your specific unit.
If the frame and opening are sound, replacing the insulated glass unit is usually the right call and costs a fraction of a full replacement. If the frame is cracked, the sill is compromised, or the unit has been leaking into the wall, full replacement makes more sense. We give you the honest answer either way, with a line-item quote for each option.
Custom-radius and oversized PGT units typically run four to eight weeks from order to delivery, and impact-rated shapes tend to the longer end. Standard-size glass replacements are much faster, often inside a week. Call (844) 797-3297 for a realistic timeline on your unit.
We work on PGT as well as CGI, CWS, ES Windows, and ECO Window Systems, so a mixed-brand home isn’t a problem. Call (844) 797-3297 and we’ll confirm what we can do for your setup.
When a PGT arch is leaking or fogging in Whitney, the fix starts with a conversation, not a sales visit. Call (844) 797-3297 to schedule your free estimate. A live person answers every time. We’re the one down the road.
Written by the team at Winslow Windows & Doors Whitney, serving Whitney and nearby areas.