Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Window Replacement in Whitney: What to Know First
PGT window replacement in Whitney usually runs $520 to $1,450 per window for standard vinyl units, and full-frame replacements with new trim and flashing land between $850 and $2,100 per opening. Most single-window jobs are a one-day installation; a whole-house replacement on a 1,800 to 2,600 square foot Whitney home takes two to four days once materials arrive. Estimates are free, line-item, and fixed, so the number you sign is the number on the invoice.
This page is for Whitney homeowners who already own PGT windows and need to replace them, repair them, or figure out which of those makes sense. We’re an independent PGT service provider, not affiliated with or authorized by PGT. What we are is authorized to install eight premium brands, and we’ve spent years taking PGT units out of houses across the southeast valley. If you want the short version of what’s wrong and what it costs, call (844) 797-3297 and a real person will pick up.
How PGT Products Fail – and How We Fix Them
PGT builds a good window. The failures we see in Whitney aren’t usually the frame giving up; they’re the seals, the glass, and the hardware wearing out in a specific order. Knowing which PGT line you have tells us a lot about what’s failing and why.
- Seal failure and fogging in PGT WinGuard impact units. Whitney sits in a high-desert wind corridor where summer afternoons regularly hit 105°F and the sun angle on a south-facing wall is punishing. On WinGuard laminated units, the warm-edge spacer between the lites takes heat cycling year after year, and the seal gives before the glass does. You get haze, then a visible film, then condensation trapped between the panes. Our fix is a full insulated glass unit replacement with a matching laminated impact lite, not a reseal. Resealing a failed unit buys you a season.
- Sash and balance wear on PGT Vinyl 7000 series single-hungs. The block-and-tackle balances in these are plastic-and-spring assemblies. After 12 to 15 years of daily opening, the springs lose tension and the sash drifts down or won’t stay up. Owners often assume the whole window is shot. Most of the time it isn’t: new OEM balances and a sash tune bring it back. We check whether the frame is still square before recommending anything.
- Silting in the weep system on PGT aluminum-clad and vinyl frames. Weep holes and the sill track on Whitney homes fill with fine dust during spring wind events. When the weeps clog, water backs up in the sill track and finds the path of least resistance, which is usually into the rough opening and the drywall under the window. Cleaning weeps is cheap. Catching it after three seasons of clogging is not. We pull the sash, clear the weeps, check the sill pan, and tell you honestly whether the wall is dry.
- Hardware failure and locked-open or locked-shut latches. PGT cam locks and keepers wear against each other. On a laminated impact window the lock is also part of the wind-load system, so a latch that won’t pull the sashes tight is a real problem, not cosmetic. We replace with OEM or a spec-matched aftermarket latch that holds the same engaging force, and we test the lock against the keeper before we leave.
- Frame and glass mismatch after storm or impact damage. When a pane is cracked from a hit, the frame is often still fine. If the PGT series is current, we can order a replacement lite and impact-rated glazing package that meets the original spec. If the series is discontinued, we say so upfront and walk you through a matched replacement so one window doesn’t look like it came from a different house.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our PGT Window Replacement Process
- 1
Phone diagnosis. You call (844) 797-3297 and reach a live person any hour of the day. We ask what series you believe you have, how old the windows are, whether the failure is glass, seal, hardware, or frame, and what the wall around it looks like. A lot of PGT calls get solved with a repair rather than a replacement, and we’ll tell you that on the phone if it sounds likely.
- 2
On-site inspection. We measure every opening, read the PGT label and series number, check the rough opening and flashing, and confirm whether the frame is still true. This is where we decide OEM versus quality aftermarket parts. On current-series units, OEM glazing and hardware keep the original warranty intact. On discontinued lines, we spec a matched impact lite and tell you exactly what we’re substituting and why.
- 3
Written, line-item estimate. Materials, labor, disposal, permits if required, and trim. No change orders once work starts. If you’d like a second opinion on an estimate you already have, we’ll give you one at no charge.
- 4
Installation. Full-frame replacements get the old unit out, the opening checked and flashed, and the new PGT unit set and shimmed level. Insert replacements go into the existing frame after we confirm the frame is sound. Every technician is background-checked and in uniform, and you know who’s showing up before the truck pulls up.
- 5
Water and operation test. We run every window through full open, close, lock, and a hose test on the sill and head. If water gets where it shouldn’t, we fix it before we pack up. Not after.
- 6
Cleanup and the 36500-Day Done Right Promise. Screens back in, floors swept, packaging hauled off. If anything on the job isn’t right, we come back and make it right. That’s the standard behind the 36500-Day Done Right Promise, and it applies to a PGT replacement exactly the way it applies to everything else we do.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Window Replacement Costs in Whitney
Here’s what PGT replacement looks like in real Whitney dollars. Numbers are typical ranges, not a quote; your estimate depends on the series, the size, and the wall.
| Scenario | Typical range per opening |
|---|---|
| Insert replacement, standard vinyl PGT unit | $520 – $850 |
| Full-frame replacement, standard vinyl PGT unit | $850 – $1,450 |
| Impact-rated PGT WinGuard replacement | $1,200 – $2,100 |
| Failed insulated glass unit, sealed unit only (repair) | $320 – $620 |
| Balance, lock, and hardware service (repair) | $140 – $320 |
What moves the price most: full-frame versus insert, impact-rated glazing versus standard, large or geometric openings, and whether the existing frame has to come out. Upstairs openings and second-story access add labor. Discontinued series sometimes cost more because the matched glazing has to be sourced. Every Whitman-area call gets a free line-item quote, and your price doesn’t move once you sign it.
Why Whitney Homeowners Call Winslow Windows & Doors Whitney for PGT Work
We’ve been locally owned and owner-operated since 2011, and the name on the shirt is the name on the business. When you call, a live person answers, day or night, and we’re not handing you a ticket number. The people who show up have been doing window work for a long time, they know PGT, and they know what fails in Whitney’s heat and wind.
We’re authorized to install PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That multi-brand bench matters here: if your PGT series is discontinued, we have real options, not a single upsell. Every technician is background-checked and uniformed before they reach your door. Seniors and veterans get a standing 10% discount that never expires, there’s no trip charge inside the home county, and repairs over $200 get $40 off. None of that is a limited-time offer. It’s just how we work.
FAQs
No, as long as the new unit is installed to spec and remains an intact sealed assembly. The warranty side that matters is the seal on the glass and the frame, and that’s tied to the product, not the installer. We keep it warranty-safe by using OEM glazing on current PGT series whenever we can, and on discontinued lines we spec a matched glazing package and tell you upfront how it affects your coverage.
OEM first when the series is current and the part is available, quality aftermarket when it isn’t. PGT hardware like balances and cam locks are not always easy to find for discontinued lines, and waiting months on a backorder doesn’t help anyone. On those calls we spec a matched part with the same engaging force and mount, test it in front of you, and stand behind the work. Call (844) 797-3297 and we’ll tell you which side of that line your windows fall on.
Repair if it’s the glass, seal, or hardware, and the frame is still square. Replace if the frame is rotting, the weeps are permanently blocked, or the series is discontinued and you’re chasing parts across the country. On PGT we lean repair far more often than replacement, because the frames hold up well in Whitney’s climate. Check the weeps and the sash operation before you assume you need a whole window. Call us for a free second opinion on any estimate you already have.
A single window is a one-day job. Three to six windows is typically one day. A full-house replacement on a typical Whitney home runs two to four days once materials are in hand. Discontinued-series glazing can add lead time, and we’ll tell you the expected lead time when we write the estimate.
Yes, when a permit is required for the work. We pull it, and we schedule the inspection. Whitney homeowners who’ve dealt with contractors who skip permits know why that matters at resale. If you’re not sure whether your job needs one, ask us on the call.
Ready for a real number? Call Winslow Windows & Doors Whitney at (844) 797-3297 for a free, line-item estimate on your PGT window replacement. Live person, any hour, no trip charge inside the home county, and the 36500-Day Done Right Promise backing every job. The one down the road.
Written by the team at Winslow Windows & Doors Whitney, serving Whitney and nearby areas.