A Winslow company - serving Whitney, NV
VLX 80 Series

VLX 80 Awning Window

Work is performed by our local vetted partner.

Sliding glass doorsSliding glass doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

VLX 80 Awning Window in Whitney, NV | Winslow Windows & Doors Whitney

The VLX 80 is a top-hinged aluminum awning window built to do something most windows can’t: open for fresh air while it’s raining. The sash lifts outward and away from the frame, so rainwater runs off instead of in. Homeowners in Whitney install them over kitchen sinks, in laundry rooms, above garage workbenches, and anywhere a casement would swing into a walkway. We’re an authorized ViewLux installation partner, which means every VLX 80 we sell is ordered factory-direct and set by installers who work to AAMA standards, not by a crew figuring it out on your wall. Free on-site measurements and written line-item quotes. Call (844) 797-3297.

Call (844) 797-3297

Product Overview – VLX 80 Awning Window

The VLX 80 is a top-hinged aluminum awning window with an energy-efficient thermal break, and it earns its keep in places where a slider or casement just won’t fit the geometry. The sash projects outward from the top, so it clears countertops, furniture and foot traffic below. That’s why you’ll see this profile over sinks, in bathrooms with tight clearances, and along the upper floors of Whitney homes where an outward-swinging casement would be a maintenance headache to reach and clean.

The engineering is straightforward and heavy where it counts. The frame uses aluminum at 0.079″ wall thickness with a 1.97″ profile width – substantial enough to hold its shape under UV load and thermal cycling, which matters in the Nevada desert where a west-facing wall can swing 40 degrees between morning and afternoon. The polyamide thermal break separates the interior and exterior aluminum so heat doesn’t conduct straight through the metal. That’s the difference between an aluminum window that performs and one that sweats and radiates.

Buyers choose the VLX 80 for three reasons: the rain-venting geometry, the slim sightlines that suit both contemporary and traditional Whitney architecture, and the fact that it’s a system, not a paned frame. Glass, finish, screen and hardware are specified together so the assembly is rated as a unit. That matters when your HOA or a permit inspector asks for documentation.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Technical Specifications

Specification Value
Frame material Aluminum, thermal-broken profile
Wall thickness 0.079″
Profile width 1.97″
Operation Top-hinged, outward-projecting sash
Glass options Clear, Frosted, Low-E, Tempered, Laminated
Finish options Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
Screen options Fixed Screen, Retractable Screen
Energy performance NFRC-rated, thermal break
Installation standard AAMA 2400 / 2410
Perimeter seal AAMA 812 low-expansion foam
Impact option Laminated glass available
Wind load Rated for local climate requirements

Custom sizing is available on order. Sizes are confirmed at the free on-site measurement so the rough opening, frame and sash all land within tolerance.

Performance Features

Thermal Efficiency – The polyamide thermal break interrupts the aluminum path between interior and exterior, and the assembly is NFRC-rated so the number on the label is the number you get. Pair it with Low-E glass and the VLX 80 holds up against Whitney’s summer sun without turning your window wall into a radiator.

Acoustic Performance – Laminated glass with a sound-dampening interlayer knocks down traffic noise and neighborhood hum. For homes near busier Whitney corridors, that option is worth the upgrade. Frame gasketing and a snug sash fit close the remaining gaps so noise doesn’t leak around the glass instead.

Airtightness & Weather Seal – Perimeter joints are sealed with AAMA 812 low-expansion foam, a spec that matters in a desert climate where daily temperature swings open and close gaps at the frame line. Sash gasketing meets the airtightness targets in the AAMA standard, keeping conditioned air in and dust out.

Waterproofing – The outward-projecting sash sheds rain away from the frame by design, and the sill and weep details are set to drain rather than pool. Installed to AAMA 2400/2410, the perimeter integrates with the wall’s weather barrier so wind-driven rain on a monsoon evening stays outside.

Wind Resistance – The 0.079″ wall thickness and 1.97″ profile give the frame rigidity under load, and the system is wind-load rated for local climate requirements. That’s the spec an engineer or inspector will ask for on a Whitney permit application, and it’s why we install it to standard rather than by feel.

Security & Hardware – The hinged sash locks closed against the frame with a positive latch and engages the screen track. The sash is small enough that it doesn’t present the same opening dimension as a large slider, and hardware finishes are specified to match the frame so the assembly looks finished, not bolted on.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Color & Glass Options

Six finishes cover the range from contemporary to traditional Whitney homes. Premium Black reads sharp against stucco and pairs naturally with the dark window walls common on newer builds. Pure White stays the safe classic on single-story ranch homes and HOA-controlled streets. Anodized Silver and Bronze are the workhorse choices where durability against sun exposure matters most. Champagne softens the look and suits lighter earth-tone exteriors. Teak Wood is a wood-grain finish for homes where you want the warmth of timber without the maintenance.

Glass choices follow the same logic. Clear is the budget-friendly baseline. Frosted earns its place in bathrooms and laundry rooms where you want privacy without closing the window. Low-E is the default recommendation for most Whitney homes given the solar load. Tempered is required in many door-adjacent locations and near floor level. Laminated adds impact resistance and sound control, useful if you’re near a busy street or want extra security.

Installation by Winslow Windows & Doors Whitney in Whitney

Installation is where a good window stops being a good window. The VLX 80 has to be set level, plumb and square in the rough opening, then sealed to AAMA 812 low-expansion foam along the full perimeter, and the whole assembly has to be integrated into the wall’s weather barrier to meet the AAMA 2400/2410 standard. Get any of that wrong and the window won’t perform to its rating – worse, it can leak, and the manufacturer warranty may not cover a defect that traces back to a bad install.

Our process: pre-install inspection of the rough opening and existing wall condition, dry-fit and shim to level, plumb and square, seal perimeter with AAMA 812 foam, flash and integrate to the weather barrier, set shutters, screens and glass, then a final water test to confirm drainage before we call it done. Cleanup included. We don’t leave flashing scraps and foam cans behind.

Whitney-specific considerations shape the work. Our summer sun load calls for the correct glass spec and orientation, and our dry-then-flash-flood weather means the perimeter seal and drainage details have to be right, not just close. Stucco and masonry walls common in Whitney homes need special flashing attention at the frame head and sill. Local permit and inspection requirements for window replacement are handled by us – review, submittal and inspection coordination included in the project so you’re not chasing paperwork while your window sits in the garage. The certified installer we connect you with is licensed and insured as Nevada requires.

Frequently Asked Questions – VLX 80 Awning Window

Get a Quote – VLX 80 Awning Window in Whitney

Ready to price a VLX 80 Awning Window for your Whitney home? We’ll come out, measure the opening, walk you through glass and finish options, and hand you a written line-item quote with fixed pricing – no change orders, no surprise line items. Schedule a free on-site measurement and start your project: call (844) 797-3297.

Written by the team at Winslow Windows & Doors Whitney.

Bring This System Into Your Home

Factory-direct pricing, free in-home measurement, certified installation in Whitney.

(844) 797-3297
Call Now - 24/7 Dispatch
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Winslow Windows & Doors Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch