A Winslow company - serving Whitney, NV
VLX 80 Series

VLX 80 Casement Window

Work is performed by our local vetted partner.

CasementCasement
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

VLX 80 Casement Window in Whitney, NV | Winslow Windows & Doors Whitney

The VLX 80 is a side-hinged aluminum casement window built by ViewLux for homeowners who want a wide, clean view and serious airflow from the same opening. Its 1.97-inch profile and 0.079-inch wall thickness give it a slim frame that lets in more glass and less metal, which is exactly what buyers in Whitney, NV are searching for when they’re replacing builder-grade windows or designing a new build. We’re an authorized installation partner for ViewLux, so every VLX 80 we install in Whitney is ordered to your exact measurements and fitted by installers who work to AAMA standards. Call (844) 797-3297 to schedule your free on-site measurement in Whitney.

Call (844) 797-3297

Product Overview – VLX 80 Casement Window

A casement window opens outward on a side hinge, driven by a crank handle inside the room. The VLX 80 takes that familiar mechanism and pairs it with an aluminum frame engineered to disappear visually. The result is a window that reads almost like a fixed pane when it’s closed and delivers a full sweep of ventilation when you open it.

The style suits a range of homes across Whitney. Contemporary and mid-century builds use it for floor-to-ceiling glazing runs where a thick frame would break the rhythm. Transitional homes in the Whitney area use it in kitchens, bathrooms, and stairwells where a hinged window would swing into the room and a slider would only open halfway. Because it opens outward, it never takes up interior wall space, which matters in tighter rooms and hallway landings.

What sets the VLX 80 apart from a basic aluminum casement is the engineering behind the profile. The aluminum is thermally broken, meaning a structural separator runs through the frame to slow heat transfer between inside and outside. That’s especially relevant in Whitney’s desert climate, where summer exterior surface temps run high and air conditioning runs hard. The frame also carries the glass in a way that keeps sightlines narrow without sacrificing wind-load strength. ViewLux builds the window; we install it to spec in Whitney so the performance ratings the manufacturer publishes actually hold up in your wall.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Technical Specifications

Attribute VLX 80 Casement Window
Frame material Thermally broken aluminum
Wall thickness 0.079″
Profile width 1.97″
Operation Side-hinged, outward opening, crank handle
Glass options Clear, Frosted, Low-E, Tempered, Laminated
Finish options Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
Screen options Fixed Screen, Retractable Screen
Sill options Standard Sill, Low-Profile Sill
Energy performance NFRC-rated thermal break system
Installation standard AAMA 2400/2410 compliant
Perimeter seal AAMA 812 low-expansion foam
Impact glass Laminated glass option for impact protection

Those numbers matter in a real install. A 1.97-inch profile keeps the frame visually light while still housing the glass unit and hardware. The 0.079-inch wall thickness is a structural measure that affects how rigid the frame stays under wind pressure and during the install itself. When we order a VLX 80 for a Whitney home, we confirm every option against the opening before it goes to production, because finish, glass, screen, and sill choices can’t be swapped after the frame is cut.

Performance Features

Thermal Efficiency – The thermally broken aluminum frame separates interior and exterior metal so heat doesn’t travel straight through the frame into your living space. Paired with Low-E glass and NFRC-rated testing, the VLX 80 helps hold interior temperatures steady during Whitney’s long cooling season, which takes pressure off your HVAC system and your utility bill.

Acoustic Performance – Aluminum frames with a proper thermal break and sealed glazing help dampen sound transfer. Laminated glass adds a sound-dampening layer that cuts traffic noise and wind howl. In Whitney, where homes near arterial roads deal with steady traffic, a laminated glass VLX 80 makes a noticeable difference inside the room.

Airtightness & Weather Seal – The VLX 80 is built to limit air infiltration, and the perimeter seal we apply during install (AAMA 812 low-expansion foam) closes the gap between frame and rough opening. That combination is what actually delivers the airtightness the manufacturer rates, because a leak at the wall joint defeats a sealed window.

Waterproofing – Outward-opening casements rely on a positive seal at the sash and proper sill detailing to shed rain. The VLX 80 uses a weep and drainage path built into the sill, and we set the frame with a slight slope so water moves outward, not into the wall. Whitney’s monsoon bursts make that slope and seal essential, not optional.

Wind Resistance – The frame and glass are wind-load rated to handle local conditions. We confirm design pressure requirements for your site before ordering, because wind exposure changes with building height and elevation on Whitney’s higher lots. Proper anchoring to the rough opening is part of how that rating gets delivered.

Security & Hardware – The VLX 80 uses a multi-point lock and folding crank handle that tucks flat to the frame. The hardware is designed so the sash pulls tight to the frame when closed, which strengthens the seal and makes the window harder to force. We check hardware operation on every window before we finish the install.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Color & Glass Options

Finish choice drives the look of a Whitney home more than almost any other window decision. Premium Black frames read sharp and modern against stucco and stone, which are common building materials in Whitney. Anodized Silver and Champagne stay light and won’t show dust the way darker finishes do on sun-exposed elevations. Bronze fits earth-tone exteriors, Pure White lifts traditional white-trim homes, and Teak Wood gives you the warmth of wood grain in an aluminum frame that won’t rot.

On glass, Clear works for shaded sides where privacy isn’t a concern, and Frosted is the pick for bathrooms and any window that faces a neighbor. Low-E is the practical default in Whitney because it cuts solar heat gain and UV. Tempered glass is required where a window is near a door or close to the floor, and Laminated glass gives you impact resistance and noise reduction together. We’ll walk you through which combination makes sense for each opening during your Whitney measurement.

Installation by Winslow Windows & Doors Whitney in Whitney

The best window in the catalog performs like a cheap one if it’s installed wrong. That’s why we treat the install as carefully as the order. Our process starts with a pre-install inspection of the rough opening: checking the framing for rot, verifying the dimensions against the order, and confirming the sill is sound before anything gets set.

We set every VLX 80 level, plumb, and square. Shim placement, fastener spacing, and anchor depth all follow AAMA 2400/2410, the same standards the window is rated to. We run AAMA 812 low-expansion foam around the full perimeter to seal the joint between frame and wall without warping the frame as the foam cures. Then we finish the interior and exterior trim, check the sash operation and lock, and run a final water test on the exterior seal before cleanup.

Why does this matter so much in Whitney? Two reasons. First, the desert sun and monsoon rain cycle stresses every seal in a building envelope. A gap we don’t seal now will leak dust in and water later. Second, improper installation voids the manufacturer’s warranty. If a window isn’t set and sealed to AAMA standards, ViewLux can decline a claim, and that cost lands on you. We install to standard so the warranty stays intact, and so your VLX 80 weathers the Whitney climate the way it was engineered to.

Frequently Asked Questions – VLX 80 Casement Window

Get a Quote – VLX 80 Casement Window in Whitney

If the VLX 80 looks like the right window for your Whitney home, the next step is a free on-site measurement. We’ll confirm your dimensions, walk you through the finish and glass options side by side, and give you a written quote with fixed pricing so nothing changes once the project starts. Call (844) 797-3297 to schedule your free measurement in Whitney today.

Written by the team at Winslow Windows & Doors Whitney.

Bring This System Into Your Home

Factory-direct pricing, free in-home measurement, certified installation in Whitney.

(844) 797-3297
Call Now - 24/7 Dispatch
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Winslow Windows & Doors Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch